Switch Adapting a Remote Control Toy

John Schimmel, 12/01/2013

Soldering jacks to circuit
step 7 of 9

Next we need to solder the leads of the switch jack onto the solder pads of the switch pins we located with the multimeter in step 5.

By soldering the switch jack onto the solder pads of the existing switch, you are simply adding a second switch to the circuit.

Using helping hands or tape, position the wires of the switch jack to overlap the existing solder pad and solder them together.

Do the same to the second solder pad and continue to connect up the other switches on the circuit.

The finished soldering project will be a solid connection between the circuit and your switch jack wires.